Simply ask a new question if you would like to start the discussion again.
Datalogic Touch 90 Drivers And ComesWhen you connect the scanner to the USB port, Windows will try to install this as an HID, but it takes an unusually long time, about 7-8 seconds, to start up the device and install the drivers and comes up as unknown device in windows devices and printers And the hand scanner is not working.
Sometimes when switching USB port back and forth can I sometimes get the hand scanner to be recognized as a HID device or a Datalogic barcode scanner, it works fine until you restart the computer. I suspect that there is a Compatibility issue between barcode scanner and the USB controller card on the computers. I have found a workaround by connecting barcode scanner into a USB-hub and then connect the USB-hub to the computer. And let the USB-hub take care of the communication with the barcode Scanner. I have Googled after an answer after my issue but it seems Im the only one experiencing this problem. Datalogic Touch 90 How To Fix ThisThese were bought at different times and also from two different suppliers for Computer model are as follows HP ProDesk 400G1 PN:D5S21EA Specifikations: Does anyone have any idea what it could be wrong and how to fix this Thanks in advance Sincerely Robert T. Datalogic Touch 90 Download Then DownloadAll you need is driver for the scanner from its support site: Please click Download then download 64-Bit USB-COM Driver v.4.4.0.0 and install to your new Windows 7 64bit computer. The driver you are referring to is if you choose to configure the barcode scanner as a virtual COM port over USB. Perhaps there is an outside chance someone there may have an idea. The thing we think we have discovered is that the Barcode Scanner (Heron D130) doesnt get enough power from the computer. When we connect the computer to a USB docking station and then connect the scanner to the docking station its works perfectly but when connected directly to the computer it doesnt. Same as the USB-hub.) We have tested the scanner with several computers and the older computers do not have this problem but the Revolve 810 does. We have a lot of these computers in our school and need to use the Heron D130 bascode scanners we have. If I buy a completely new scanner it seems as if it needs less power and works but this is not possible for us to do at this moment. Can we get more power to the USB-ports in the computer in some way Any settings I can change. We use passive USB Hubs that solves the problemon those computers. HP EliteDisplay E241 as we have thers an inbulit 2-port usb hub in the monitor that works.) The problem lies in the incompatibility between the Intel USB controller and hand scanner, may be related to USB 3.0 when you let an other usb-controller take charge in handshakeing (like an usb-hub) it works. Because of no one of the big companies want to acknowledge the problem or fix it, we personaly have chosen to move to a AMD platform CPU instead of the Intel and now it works great We also get more performance for your money when AMD generally cost less to purchase. And due to Datalogics poor support where they do not even answer email (their only channel for the support) I have chosen to not use their products anymore. If you think you have received a fake HP Support message, please report it to us by clicking on Flag Post. By using this site, you accept the Terms of Use and Rules of Participation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |